liniLED Mounting: PET, Saddle & Stainless Clip
The liniLED® System can be installed on flat and/ or curved surfaces. The liniLED® PET Channel is ideal for mounting the liniLED® Top and Side LED strips on linear surfaces. The profile can easily be secured with the double-sided tape on the back or by fastening it with screws. The liniLED® Saddle (incl. tie wrap) or stainless clip is the perfect mounting tool, in case the liniLED® Top or Side LED strip will be mounted on curved surfaces.
liniLED Mounting: Aeris Extrusion
The aluminum liniLED® Aeris profile is a durable profile which can be finished with a diffuse or clear cover. Profiles come in 3/4″ and 1-1/4″ profiles. Illuminate the profile with liniLED® PCB or liniLED® Top LED strips. White, RGB color changing or mono colors are available. Diffused lenses are available as flush fitting or raised to provide horizontal illumination from the sides. Aeris profiles can be fully encapsulated for IP67 outdoor applications (see Products / Aeris).
Cordless low voltage. These ultra-lightweight extrusions can be suspended with adjustable, cordless low voltage cable suspension to create a free-floating appearance.
liniLED Mounting: Cove Extrusion
This simple extrusion allows ease of installation while offering tamper proofing and avoidance of bug nesting. American sourced metals are available when required to meet specification. The two-piece aluminum cove extrusion is available in three different profiles: standard, asymmetric and narrow beam. Installation is easy: Mount the back extrusion on the wall or surface with screws, and press fit the front decorative extrusion into place. Then press the inverted liniLED® strip securely into the upper channel allowing the light output to shine in a downward direction.
liniLED: 1/2″ & 3/4” Aluminum Extrusion
liniLED® PCB LED strips can easily be mounted on linear surfaces with the liniLED® ¾” Extrusion. The liniLED® ¾” Extrusion can be mounted with liniLED® Mounting Clips.
liniLED Mounting: 1″ & 2″ Line Extrusion
To create light lines in walls and/or ceilings, the liniLED® 1” and 2” Line Extrusions offer the ideal solution. Depending on the desired effect, you can choose between diffuse or clear acrylic. Related accessories are the end caps and mounting clips. RAL colors on request.
liniLED Mounting: Stair Extrusion
The Stair profiles offer the possibility to illuminate staircases with direct or indirect LED lighting (liniLED® Top LED strips). These profiles are ideal for cinemas, theaters, offices, hotels, restaurants, hospitals, schools / universities, residences, etc.
liniLED Mounting: Wall/floor Extrusion
The Wall/floor profile is walk over and therefore ideal for several floor solutions (also suitable for wall solutions) and is available in the colors silver and black. Other anodized colors available, on request. Available in standard lengths of 1, 2 and 3 meters (4 meters on request).